A great reference as part of the design process for rectangular duct construction
Product Details:
A new approach to the selection of material thickness and reinforcing
systems for rectangular industrial duct subject to positive or
negative pressures up to and over 100" w.g. and 30 ft. hanger spacing
of duct sizes to 14' x 14' in 16 gauge to 1/2" plate. Learn the
procedures for designing class I, II, III and IV duct by the panel
(top, sides and bottom) after considering loads to which each panel
will be subjected. Also considers the effects of abrasives, particulate
loading, corrosives, high temperature and product and environmental
contamination. Referenced in the American Conference of Governmental
Industrial Hygienists' (ACGIH) Industrial Ventilation Manual and
in the National Fire Protection Association (NFPA) Standard 91.
136 pp.
Table
of Contents:
1. Definition
of Industrial Duct
2. System
Classification
3. Types of
Material
4. Procedures
for Designing Rectangular Duct
5. Design
Examples
6. Modifications
and Adaptations
7. Tables
A For Selecting
Material Thickness
B For Selecting
Duct Stiffeners (fixed corners)
C For Selecting
Duct Stiffeners (hinged corners)
D Stiffener/Reinforcing
Member Data
E For Selecting
Support Spacing
F Duct Section
Properties
G Bolting
for Flange Connections
H Hole Gage
for Flange Connections
I Wind conversion
8. Typical
seams, connections and stiffeners
9. Design
Criteria
1 0. Symbols
Customers who bought this product also bought these:
